Panasonic HC-VXF1 Basic Owner's Manual page 40

Problem
Color or brightness of the
image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
Problem
Scenes/still pictures
cannot be played back.
Please refer to "Owner's Manual (PDF format)" for details.
40
DVQX1447 (ENG)
Recording
≥ Color or brightness of the image may change, or you may see
horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
≥ In Motion Picture Recording Mode, record in Intelligent Auto
Mode/Intelligent Auto Plus Mode or set the shutter speed as
follows:
j When [REC FORMAT] is set to [24p]:
Set to 1/50 seconds in areas where the power supply
frequency is 50 Hz, or 1/60 seconds in areas where the
frequency is 60 Hz.
j When [REC FORMAT] is set to a setting other than [24p]:
Set to 1/100 seconds in areas where the power supply
frequency is 50 Hz, or 1/60 seconds in areas where the
frequency is 60 Hz.
≥ In Still Picture Recording Mode, this will not affect the
recorded image.
≥ In the following cases, setting the shutter speed to
1/120 seconds reduces the intensity of the problem:
j In FULL HD Slow Motion Mode
j (For the /
WXF1
Slow & Quick Video Mode
Playback
≥ Any scenes/still pictures where the thumbnails are displayed
as cannot be played back.
Check points
/ )
VXF1 VX1
Check points