Set The Handset Led Indicator Behavior - Philips XL495 Series User Manual

Note
•
When auto hang up is deactivated, you can put the
handset to the base station or charging cradle and
continue with your call through the speaker.
Set the handset LED indicator
behavior
You can set the LED indicator behavior on your
handset for different events or charging status.
Select [Menu] > [Phone setup] > [LED status]
> [Events status]/[Charge status ], then press
[OK] to confirm.
» The setting is saved.
The table below shows you the current status
with different LED indicator behavior on the
handset.
LED Events status
indicator
On Audio boost is on.
Off In a call or standby mode.
Flashing • There is a new message.
• There is a new voicemail.
• There is a missed call.
• The phone is muted.
LED Charging status
indicator
On • The handset is on the base
or charging cradle in standby
mode.
• Audio boost is on during a call.
Off The handset is off the base or
charging cradle.
Flashing The phone is muted.
EN
27