Yamaha Electone EL-57 Owner's Manual page 34

3
3
-1
3
-2
3
-3
3
-4
3
-5
3
-6
NOTE:
Each effect may not be noticeable even
though you select the effect here, if the
corresponding settings on the Effect
Set page (page 32) are not appropriate.
NOTE:
The Pan effect is displayed and active
only when other effects are set to OFF
(in the EFFECT parameter above).
30
2) 2 FEET
Determines the octave setting of the voice. PRESET is the original
(factory) setting; 4' is the highest and 16' is the lowest.
3) 3 EFFECT (On/Off)
Determines the effect type applied to the voice section. This is essentially
an on/off switch for the effects; settings and adjustments to the effects
are made from other pages. (For more information, see page 32.)
3
PRESET:
-1
Selects the original (factory) effect.
3
OFF:
-2
Cancels the effect.
3
TREM (TREMOLO):
-3
Selects tremolo/chorus. See page 37 for the details of the
tremolo/chorus setting.
3
SYMPH (SYMPHONIC):
-4
Selects symphonic/celeste. See page 32 for the details of the
symphonic/celeste setting.
3
DELAY:
-5
Selects delay. See page 33 for the details of the delay setting.
3
FLANG. (FLANGER):
-6
Selects flanger. See page 33 for the details of the flanger setting.
4) 4 PAN
Determines the position of the voice in the stereo image. Seven pan
positions are available.
5 VOL. (VOLUME)
Fine adjustment of the voice volume. See page 19 for more information.