Recording Melodies - Step Record (Note) - Yamaha Clavinova CVP-900 Owner's Manual

Recording Your Performances and Creating Songs— Song Creator
Recording Melodies — Step Record (Note)
In this section, we'll show you how to use Step Recording
by guiding you through this actual music example,
shown at right.
The operations here apply to step 6 on page 99.
1
1
-1 Select this note.
2
2
3
3
-2 Select this note.
4
4
-2 Select this note.
To input rests, simply specify the position for the next note (using the [BAR], [BEAT], and [CLOCK] buttons) and input the note.
Any "empty" interval between two successive notes is automatically registered as a rest.
■ Play back the newly created melody
▲
Use the [C] ( ) button to move the cursor to the beginning of the song, and press the SONG [START/STOP] button
to hear the newly entered notes. To actually enter the recorded data, press the [EXIT] button. The entered data can be
edited from the SONG CREATOR (1 - 16) display (page 107).
100
CVP-900
1
-2 While holding down this note...
1
-3 ...press this (to input a tie).
2
-2
2
-3
2
-4
-1 Select this note.
3
-1 Press this button to
display the dotted notes.
3
-3
4
-1 Call up the normal notes
by pressing this button.
4
-3
The notation display on the instrument may not be accurate,
especially for tied notes or longer notes. To have the notation dis-
played accurately, set the gate time to tenuto by using the [H]
button, and input the notes as desired.