To Use All Features; Control Panel - Panasonic ECONAVI NR-BZ600 Operating Instructions Manual

To use all features

Control Panel

 Temperature setting and a guide of temperature
The temperature can be adjusted for Min-Max levels.
Press [Fridge] button to adjust temperature in refrigerator compartment and press
[Freezer] button to adjust temperature in freezer compartment.
Temperature
Button
Fridge
Freezer
Normally, use the refrigerator with the temperature set to "Med".
(If the temperature control of the freezer compartment or refrigerator compartment is
set to other than "Med", ECONAVI does not operate.)
 How to operate the "9 levels" mode
This refrigerator is specially designed with adjustable temperature levels using 9
different temperature levels as explained below:
For the Refrigerator Compartment
1 Set the LED display to the "Min" position by pressing the [Fridge] button.
2 Press and hold the [Fridge] button for 10 seconds until the LED display is at the
"Min" position.
3 Use the [Fridge] button to set the required temperature mode, where one step is
the minimum cooling mode and 9 step is the maximum cooling mode.
For the Freezer Compartment
Operate above 1 and 3 steps with pressing [Freezer] button instead of [Fridge]
button.
To reset the setting "9 levels" mode
Repeat steps 1 and 2 to return the unit to normal operation mode.
Cooling
Level
Step
LED Display
● The temperature control can vary depending on the environment and amount of food
stored in the refrigerator.
ARAH0A106620_EN.indd 11 ARAH0A106620_EN.indd 11
Max
setting
Lower than "Med"
by approx.
2°C ~ 3°C
Lower than "Med"
by approx.
2°C ~ 3°C
Minimum
1 2 3
Lighting
Med
Approximately
1°C ~ 6°C
Approximately
-23°C ~ -17°C
4 5 6
Blinking
Operation
Min
Higher than "Med"
by approx.
2°C ~ 3°C
Higher than "Med"
by approx.
2°C ~ 3°C
Maximum
7 8 9
Not lighting
11
5/22/2562 BE 14:11 5/22/2562 BE 14:11