Touch Sensitivity; Transposition - Yamaha Clavinova CLP-123 Owner's Manual

Yamaha clavinova instrument owner's manual
Table of Contents

Advertisement

Touch Sensitivity

Three different types of keyboard touch sensitivity — HARD, MEDIUM or SOFT — can
be selected to match different playing styles and preferences. The different touch sensitivity
settings are selected by using the [MIDI/TRANSPOSE] and [REVERB] buttons.
HARD
(ROOM indicator) ...........
MEDIUM
(HALL 1 indicator) ......
SOFT
(HALL 2 indicator) ...........
REVERB
ROOM
HALL 1
HALL 2
COSMIC

Transposition

The Clavinova's TRANSPOSE function makes it possible to shift the pitch of the entire key-
board up or down in semitone intervals up to a maximum of six semitones. "Transposing" the
pitch of the Clavinova keyboard facilitates playing in difficult key signatures, and you can easily
match the pitch of the keyboard to the range of a singer or other instrumentalist.
The [MIDI/TRANSPOSE] button and keys F#2 through F#3 on the keyboard are used for transposition.
F#
2
MIDI/
TRANSPOSE
Transpose
down.
12
The HARD setting requires the keys to be played quite hard to
produce maximum loudness.
The MEDIUM setting produces a fairly "standard" keyboard
response. This is the initial factory default setting.
The SOFT setting allows maximum loudness to be produced
with relatively light key pressure.
To select a touch sensitivity setting press the [REVERB] button a few
MIDI/
times while holding the [MIDI/TRANSPOSE] button until the indicator
TRANSPOSE
corresponding to the desired setting lights.
Z
C
F#
3
3
X
C
Transpose
up.
Normal
pitch.
* Pressing the C3 key produces normal keyboard pitch. Pressing the key to
the left of C3 (B2) transposes the pitch of the keyboard down a semitone,
the next key to the left (Bb2) transposes down a whole tone (two semi-
tones), etc., down to the F#2 key which transposes down 6 semitones.
Upward transposition is accomplished in the same way using the keys to
the right of C3, up to F#3 which transposes up 6 semitones.
Press and hold the [MIDI/TRANSPOSE] button.
Press a key between F#2 and F#3 according to the desired amount of
transposition.*
Release the [MIDI/TRANSPOSE] button.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents