4.2.1 Preliminary steps
(1) Download method 1 (PCB Assy)
(2) Connect the download jig to D-sub jack
4.2.2 Download Steps
(1) Execute 'ISP Tool' program in PC, then a main window will
be opened
(2) Click the connect button and confirm "Dialog Box".
(3) Click the Config button and Change speed
E2PROM Device setting : over the 350Khz
Copyright
LG Electronics. Inc. All right reserved.
Only for training and service purposes
(4) Read and write bin file
Click "(1)Read" tab, and then load download file(XXXX.bin)
by clicking "Read".
(5) Click "Auto(2)" tab and set as below
(6) click "Run(3)".
(7) After downloading, check "OK(4)" message.
- 14 -
LGE Internal Use Only