Acer B248Y User Manual page 28

Audio
Picture Volume
Color Mute
Audio
Pertormance
OSD
System
Save Settings to...
Move
Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Volume: Adjust the volume
5. Mute:To choose
Performance
Picture Over Drive
Color
Adaptive Sync
Audio
Refresh Rate Num
Pertormance
Ultra-Low Latency
OSD
System
Save Settings to...
Move Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to
the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Over Drive: Select Off, Normal or Extreme.
5. AdaptiveSync: To control support AdaptiveSync or not, default is On.
-----------------------------------------------------------------------------------------------------------
Note: If AdaptiveSync is "ON", then the Over Drive selection is set to "Normal"
automatically.
If AdaptiveSync is "OFF", then the user can set Over Drive to either one of the
three settings including: (a) Extreme (b) Normal (c) Off.
Mode - Stardard
Off
mute on/off .
Mode - Standard
Normal
On
Off
On
Exit
70
X
X