Table of Contents
Advertisement
FUNCTIONAL
DESCRIPTION
4
5
1
1. Lamp
2. Speed control screw
3. Switch lever
4. Higher
5. Lower
1
A
1. Reversing switch lever
6
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
003795
CAUTION:
•
Before plugging in the tool, always check to see that the
switch lever actuates properly and returns to the "OFF"
3
position when released.
2
To start the tool, simply squeeze the switch lever. Tool speed
is increased by increasing pressure on the switch lever.
Release the switch lever to stop.
A speed control screw is provided so that maximum tool
speed can be limited (variable).
Turn the speed control screw clockwise for higher speed, and
counterclockwise for lower speed.
Reversing switch action
003796
CAUTION:
1
•
Always check the direction of rotation before operation.
•
Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
B
the tool stops may damage the tool.
This tool has a reversing switch to change the direction of
rotation. Move the reversing switch lever to the
(A side) for clockwise rotation or the
counterclockwise rotation.
Lighting up the lamps
CAUTION:
•
Do not look in the light or see the source of light directly.
To turn on the lamp, start the tool. Then, the lamp lights up
the top of the bit. To turn it off, stop the tool.
NOTE:
•
Use a dry cloth to wipe the dirt off the lens of lamp. Be
careful not to scratch the lens of lamp, or it may lower the
illumination.
position
position (B side) for
Advertisement
Table of Contents
