Note
•
To achieve progressive scan pictures, make sure that
your TV supports the progressive scan feature, and
your TV is connected to this player through the Y/Pb/
Pr connectors.
Sound
1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
•
[Analogue Output]: Select an audio
format for sound output when this
player is connected through the
AUDIO OUT L/R connectors.
[Digital Audio]: Select an audio format
•
for sound output when this player is
connected through the COAXIAL
connector.
•
[Digital Output]: Select a type
of digital output: [Off] - Disable
digital output; [All] - Support
multi-channel audio formats;
[PCM Only] - Downmix to two-
channel audio signal.
[LPCM Output]: Select a LPCM
•
(Linear Pulse Code Modulation)
output sampling rate. The higher
the sampling rate, the better the
sound quality. [LPCM Output]
is enabled only when [PCM
Only] is selected under [Digital
Output].
[HDMI Audio]: Enable or disable
•
the audio output through HDMI
connection.
[Audio Sync]: Set a delay time for
•
audio output to match the video play.
•
[Volume]: Change a volume level.
•
[Sound Mode]: Select a preset sound
effect.
•
[Night Mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
Note
•
Night mode is only available for Dolby encoded DVD
discs.
Preference (languages,
parental control...)
1
Press .
2
Select [Setup] > [Preference] to access
the preference setup options.
[Audio]: Select an audio language for
•
video.
[Subtitle]: Select a subtitle language
•
for video.
•
[Disc Menu]: Select a menu language
for a video disc.
•
[Parental Control]: Restrict access
to discs that are encoded with
ratings. Input "136900" to access
the restriction options: When the
password field is highlighted, press OK
to enter an input stage, press
to select a digit and press
change a digit position.
•
[PBC]: Display or skip the content
menu for VCD and SVCD.
•
[Password]: Set or change a
password to play a restricted disc.
Input "136900" if you do not have a
password or if you have forgotten
your password
[DivX Subtitle]: Select a character
•
set that supports the subtitle of your
DivX video.
•
[Version Info]: Display the software
version for this player.
/
to
EN
13