Error Messages - LG WT-70SNBW Owner's Manual

Error Messages

Symptoms
The door is not closed properly.
Door lock switch error.
Special Drain Feature.
Water supply taps are not fully open.
Water line hoses are kinked, pinched,
or crushed.
Water inlet filters are clogged.
Water supply pressure to tap or house
is too low.
Water supply connected with
leaklimiting hoses.
Foreign objects, such as coins, pins,
clips, etc., caught between the wash
plate and the inner basket.
Drain hose is kinked, pinched, or
clogged.
Drain discharge is more than 1.2 m
above bottom of washing machine.
Reason Solution
• Close the door completely. If the error
code is not released, call for service.
• Check nothing is caught under the
door, including shipping materials or
lothing.
• Close the door completely. If the error
code is not released, call for service.
• If the washing machine is paused
during a cycle for a few minutes, the
cycle will be cancelled and any water
remaining in the drum will be drained.
• Fully open tap.
• Straighten the hose(s).
• Clean the inlet filters.
• Contact a plumber to have the water
lines repaired.
• Do not use leak limiting hoses.
• Turn off the washing machine and then
press the POWER/Auto Off button.
Press the Spin button without
selecting a cycle to drain and spin the
load. When the spin is complete,
remove the clothes and then find and
remove any objects caught in the wash
plate.
• Straighten the hose(s).
• Adjust or repair drain. Maximum drain
height is 1.2 m.
EN
35