Daily Use - AEG L 79484 EFL User Manual

14 www.aeg.com
9.7 U./Min.
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
• Set this option to remove all spin
phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
• The display shows the indicator
Rinse Hold
• Set this option to prevent the laundry
creases.

10. DAILY USE

10.1 Activating the appliance
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
3. Press button Ein/Aus to activate the
appliance.
A short tune sounds.
10.2 Loading the laundry
1. Open the appliance door
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry
in the drum.
4. Close the door.
.
• The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The door stays locked. You must drain
the water to unlock the door.
• The display shows the indicator
To drain the water refer to
'At the end of the
programme'.
9.8 Temp.
Set this option to change the default
temperature.
Indicator = cold water.
The display shows the set temperature.
CAUTION!
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
10.3 Filling the detergent and
additives
Compartment for prewash phase
an soak programme.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of
liquid additives.
.