Download Print this page

Datavideo RP-75 Instruction Manual

Rear panel with vp-633x3 & sdi bnc 1/oxb

Download this manual

Table of Contents

Page 2: Table Of Contents
SERVICE & SUPPORT .................... 5 Disclaimer of Product and Services The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete.
Page 3: Warranty
• Certain parts with limited lifetime expectancy such as LCD Panels, DVD Drives, Hard Drives are only covered for the first 10,000 hours, or 1 year (whichever comes first). Any second year warranty claims must be made to your local Datavideo office or one of its authorized Distributors before the extended warranty expires.
Page 4: Introduction
Introduction The RP-75 is a rack-mount rear panel with 8 SDI BNC I/O ports and 3 built-in VP-633 SDI Repeater transmitters. It can be installed into the OBV-2800+CCU-100 OB VAN Studio System to provide the user with up to 8 I/O ports for video transmission. The VP-633 SDI Repeater transmitter extends the cable transmission length to 200 meters.
Page 5: Dimensions
Dimensions Specifications I/O Interface SDI BNC I/O port x 8 Operating Temperature 0°C to 40°C (32°F to 102°F) Operating Humidity 10% to 90% (non condensing)
Page 6: Service & Support
Service & Support...