Table of Contents
Advertisement
Recording
Easily Optimising the Brightness for a Specified
Area
(Touch AE)
Applicable modes:
You can easily optimise the brightness for a touched position. When the face of the subject
appears dark, you can brighten the screen according to the brightness of the face.
You can optimise just the brightness for a touched position by using a function button or
you can optimise both the focus and brightness for a touched position by optimising the
brightness when using the Touch AF.
Optimising only the brightness for a touched position
1
Set a function button to [Touch AE].
•
The following step is an example in which [Touch AE] is assigned to [Fn6].
2
Touch [ ].
6 6
3
Touch [
AE
•
The setting screen for the brightness optimisation position
is displayed.
•
[Metering Mode] is set to [
for the Touch AE.
4
Touch the subject you want to optimise the
brightness for.
•
Touching [Reset] will bring the brightness optimisation
position back to the centre.
5
Touch [Set].
∫
Cancelling the Touch AE function
Touch [
].
•
[Metering Mode] returns to the original setting, and the brightness optimisation position is
cancelled.
].
], which is used exclusively
AE
(P52)
151
Fn6
AE
Fn7
Advertisement
Table of Contents
