Table of Contents
Advertisement
Getting Connected
GPRS/3G
Your mobile phone will be automatically configured to use
your wireless service provider's GPRS/3G/EDGE service (if
available) when you turn on the phone for the first time. Note
that the SIM card must be inserted.
Checking the Network Connection
1. Touch
2. Touch Wireless & networks > Mobile networks.
3. Touch Network Mode to check the network connection.
Note:
Your mobile phone will automatically read the access point of the SIM
card. For this reason, do not change the parameters of the access
point; otherwise, you might not be able to access network sources.
Turning on the Data Service
1. Touch
2. Touch Wireless & networks > Mobile networks.
3. Select the Data enabled check box to turn on the data
connection.
Wi-Fi
Wi-Fi gives you wireless access to broadband Internet
access. To use Wi-Fi on your mobile phone, you need to
have an access to wireless access points (hotspots).
Obstacles that block the Wi-Fi signal will reduce its strength.
> Settings.
> Settings.
39
Advertisement
Table of Contents
