Acer KG272 KG272S User Manual page 20

Selecting the input
Open the Input control and select HDMI 1, HDMI 2, DP or Auto Source. When you are done,
press the joystick to exit current page and store.
Input
Input
HDMI 1
Auto Source
On
Move OK
The Function page
Open the Function page to adjust the functions, settings which you want using the arrows.
When you are done, toggle the joystick to the left or right to go back one level or use
to exit current page and store.
Picture
Mode - User
Picture
Brightness
Color Contrast
Black Boost
Audio
Gaming Blue Light
OSD ACM
HDR
System
Super Sharpness
Save Settings to...
Move Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Blue
Light, ACM,Super Sharpness.
5. Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Adjusts the balance between light and dark shades.
6. Contrast: Adjust the contrast from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Sets the degree of difference between light and dark areas.
7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
8. Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is
shown -- 80%, 70%, 60%, or 50%.
-----------------------------------------------------------------------------------------------------------
Exit
80
50
9
Off
Off
X
Off
Off
X