Getting Started - OneRemote DabWiFi2 User Manual

Getting Started

This OneRemote DAB+/FM/WiFi tuner has been re-designed for operation in a Bang & Olufsen remote
control system, allowing full control with a Bang & Olufsen remote control terminal either directly or via
connection to Bang & Olufsen equipment. Thus the tuner is BeoLink compatible.
If the Bang & Olufsen system comprises one or more link rooms in a BeoLink System, sound may be
distributed to these rooms, and in some cases – see below – the tuner might even be controlled from there.
Operation details described below require correct connection of the tuner to the Bang & Olufsen system.
b
When initially powered up the DabWiFi2 tuner is programmed to be switched on by pressing or
y
on the Bang & Olufsen remote. In most cases though reprogramming shall be carried out during this
initial installation. See the Installation Manual.
Hereafter the daily operation shall – in most cases - be limited to selecting a pre-set favorite program.
The OneRemote DabWiFi2 tuner is supplied with a DataLink cable enabling connection to most Bang &
Olufsen radios. But some system configurations require an adaptor as shown later in this manual and
explained in detail in the Installation Manual.
3
www.oneremote.dk