Display - LG DLEX3170 Series Owner's Manual

Display

The display shows the settings, estimated time remaining, options, and status messages for your dryer.
When the dryer is turned on, the light in the display will illuminate.
- When the START/PAUSE button is pressed, the dryer will display the estimated
(SENSOR DRY) or set time (TIME DRY) remaining, and begin tumbling.
NOTE : The cycle time on SENSOR DRY cycles may fluctuate as the dryer
recalculates drying time for optimal results
- This portion of the display shows which stage of the drying cycle is currently
disabled except the POWER button. This prevents children from changing settings
while the dryer is operating
check the filter. It turns off when the START/PAUSE button is pressed.
- If you have a special combination of settings that you use frequently, you can
save these settings as a CUSTOM PROGRAM.
- The FLOW SENSE™ duct blockage sensing system detects and alerts you to
blockages in the ductwork that reduce exhaust flow from the dryer. This improves
operating efficiency and helps minimize service calls, saving your money.
INTRODUCING YOUR DRYER
11