Important Safety Instructions - Whirlpool GJC3055 Use And Care Manual

Whirlpool electric cooktop use & care guide gjc3055, gjc3655, gjc3054, gjc3654, gjc3034, gjc3634, rcc3024
Hide thumbs Also See for GJC3055:
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT SAFETY INSTRUCTIONS

WARNING:
To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the cooktop, follow
basic precautions, including the following:
CAUTION:
Do not store items of interest to children in
I
cabinets above a cooktop – Children climbing on the
cooktop to reach items could be seriously injured.
Proper Installation – Be sure your cooktop is properly
I
installed and grounded by a qualified technician.
Never Use Your Cooktop for Warming or Heating the
I
Room.
Do Not Leave Children Alone – Children should not be left
I
alone or unattended in area where cooktop is in use. They
should never be allowed to sit or stand on any part of the
cooktop.
Wear Proper Apparel – Loose-fitting or hanging garments
I
should never be worn while using the cooktop.
User Servicing – Do not repair or replace any part of the
I
cooktop unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
Storage on Cooktop – Flammable materials should not be
I
stored near surface units.
Do Not Use Water on Grease Fires – Smother fire or flame
I
or use dry chemical or foam-type extinguisher.
Use Only Dry Potholders – Moist or damp potholders on
I
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
I
UNITS – Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not touch,
or let clothing or other flammable materials contact surface
units or areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and surfaces
facing the cooktop.
Use Proper Pan Size – This cooktop is equipped with one
I
or more surface units of different size. Select utensils
having flat bottoms large enough to cover the surface unit
heating element. The use of undersized utensils will
expose a portion of the heating element to direct contact
and may result in ignition of clothing. Proper relationship of
utensil to burner will also improve efficiency.
SAVE THESE INSTRUCTIONS
Never Leave Surface Units Unattended at High Heat
I
Settings – Boilover causes smoking and greasy spillovers
that may ignite.
Glazed Cooking Utensils – Only certain types of glass,
I
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for cooktop service without breaking
due to the sudden change in temperature.
Utensil Handles Should Be Turned Inward and Not Extend
I
Over Adjacent Surface Units – To reduce the risk of burns,
ignition of flammable materials, and spillage due to
unintentional contact with the utensil, the handle of a
utensil should be positioned so that it is turned inward, and
does not extend over adjacent surface units.
Do Not Cook on Broken Cooktop – If cooktop should
I
break, cleaning solutions and spillovers may penetrate the
broken cooktop and create a risk of electric shock. Contact
a qualified technician immediately.
Clean Cooktop With Caution – If a wet sponge or cloth is
I
used to wipe spills on a hot cooking area, be careful to
avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
For units with ventilating hood –
Clean Ventilating Hoods Frequently – Grease should not
I
be allowed to accumulate on hood or filter.
When flaming foods under the hood, turn the fan on.
I
For units with coil elements –
Make Sure Reflector Pans or Drip Bowls Are in
I
Place – Absence of these pans or bowls during
cooking may subject wiring or components
underneath to damage.
Protective Liners – Do not use aluminum foil to line surface
I
unit drip bowls, except as suggested in the manual.
Improper installation of these liners may result in a risk of
electric shock, or fire.
Do Not Soak Removable Heating Elements - Heating
I
elements should never be immersed in water.
3

Advertisement

Table of Contents
loading

Table of Contents