Preparation; Attaching The Base; Preparing Your Lcd Hdtv For Wall Mounting - Westinghouse TX-42F970Z User Manual

PREPARATION

IMPORTANT: Do not apply pressure to the screen display area which may compromise the
integrity of the display. The manufacturer's warranty does not cover user abuse or improper
installations.

ATTACHING THE BASE

IMPORTANT: The Base of the HDTV must be assembled prior to usage.
1. Place TV unit face down on a soft and flat surface
(blanket, foam, cloth, etc.) to prevent any damage to
the HDTV.
2. Carefully align and insert the Base to the stand.
3. Insert the screws to the bottom of the base and
tighten the base to the stand.
PREPARING YOUR LCD HDTV FOR WALL
MOUNTING
We suggest that you keep your TV at least 2.56 inches (65 mm) from the wall to prevent cable
interference.
Before mounting your TV on the wall, you need to remove the base.
For your safety, please use only with UL listed wall mount bracket with minimum weight of the
TV without stand. (Please see page.16.)
To attach a wall mount bracket to your TV:
1 Loosen the screws on the back of the stand and remove the back cover of the stand.
2 Pull up the stand base from the hinge to remove the stand base from your TV.
3 Secure the wall mount bracket to the back of your TV using four M6 screws, as indicated
in the illustration.
NOTE
 400mmx200mm wall mount bracket & M6 screws are not included.
 After taking the base apart, users must attach the two screw lockers (marked the picture)
to machine, in order to prevent gap after hanging on the wall.
400 mm
200 mm
6