Vacuum Compartment - Hitachi R-G620GJ How To Use Manual

Vacuum Compartment

1
Pull out the Vacuum Case.
For how to remove,
Be sure to remove foods contained in the Vacuum Case.
2
Wipe off following parts with a soft
cloth which is steeped in lukewarm
water.
※ Do not use the detergents, etc.
Aluminum Tray
Vacuum compartment gasket
Request
● Wipe the ceiling of the compartment (platinum catalyst
and LED light) gently. Failing to do so may cause damage.
● If detergents and others except lukewarm water are used
to clean the vacuum compartment gasket, the vacuum
compartment gasket may be damaged, deformed or
change in color, which may cause the vacuum state
unable to keep well.
3
Attach the Vacuum Case.
For how to attach,
Loosened vacuum compartment gasket or loose-fitting door of the
Vacuum Case may cause the vacuum state unable to keep well.
Once a month
Pg.64
Vacuum Compartment
Vacuum Container
Gasket seat
Pg.64
When the Vacuum Compartment Gasket is dirt
1
Remove the vacuum compartment
gasket from the Vacuum Case.
Grasp the tab of the vacuum
compartment gasket on the
observer's upper right and
remove it by hand
carefully.
2
Rinse dirty portion in water using
a soft sponge, etc.
※ Do not use the detergents, etc.
3
Wipe off excess moisture with a
dry cloth and dry it out naturally.
4
Wipe off dirt in the vacuum
compartment gasket
mounting groove.
Groove for attaching the vacuum compartment gasket.
5
Attach the vacuum compartment gasket.
Align the tab to the notch accurately, and then combine
them together.
Tab
Tab
Notch of the groove
61