Brother LB5000S Operation Manual page 66

Embroidering
Memo
• If [Embroidery Frame Identification View] in the settings
screen is set to [ON], the pattern can be edited in the
screen as if that embroidery frame is attached.
a
b
1 The embroidery frame selected when [Embroidery
Frame Identification View] is set to [ON] is highlighted.
Press this key to switch the setting between [ON] and
[OFF].
2 The embroidering area for the selected frame is
displayed.
3 Patterns that will not fit in the selected frame appear
shaded and cannot be selected.
• There are three embroidering area sizes for embroidery
frame (small).
When [Embroidery Frame Identification View] is set to
[ON] for embroidery frame (small), the area for arranging
patterns can more easily be seen. The area outside of
the embroidering area will have a different background
color.
1 2
1 2 cm × 6 cm (approx.1 inch (H) × 2-1/2 inches (W))
2 3 cm × 5 cm (approx.1-1/8 inch (H) × 2 inches (W))
3 4 cm × 3 cm (approx.1-1/2 inch (H) × 1-1/8 inch (W))
4 Patterns are arranged outside of the embroidering
area.
■ Selecting character patterns
Press .
a
b Press the key of the font you want to embroider.
c Press a tab to display the desired selection screen, and
then type in the text.
a
b
• To enter a space, press
64
c
3 4
1 Current line number
2 Tab
.
• After selecting a character if you would like to
change the character size press
changes each time you press the key, from large to
medium to small. After the character size is changed,
all characters on the same line will have the new
character size.
• If you make a mistake, press
• To check all entered characters, for example, when
there are multiple text lines, press
• To add multiple lines, press
• When the Japanese font is selected, the text can be
switched between being written vertically and
horizontally by pressing
d Press .
• For details on editing the pattern, refer to "Editing
Patterns (Pattern Editing Screen)" on page 71.
■ Selecting frame patterns
a Press .
b Press the key of the frame shape you want to
embroidery.
Press the key of the frame pattern you want to
c
embroidery.
d Press .
• For details on editing the pattern, refer to "Editing
Patterns (Pattern Editing Screen)" on page 71.
■ Checking the pattern position
The embroidery frame moves and shows the pattern position.
Watch the frame closely to make sure the pattern will be
embroidered in the right place.
a Press on the embroidery settings screen.
. The size
to erase the mistake.
.
.
.