GE JE1340 Use And Care & Cooking Manual page 26

PROBLEM
OVEN WILL NOT
COME ON
CONTROL PANEL
LIGHTED, YET OVEN
WILL NOT START
• Steam or vapor escaping from around the door.
• Light reflection around door or outer case.
• Dimming oven light and change in blower sound
may occur while operating at power levels other
than high.
If you need more help...call, toll free: GE Answer Center
26
QUESTIONS?
USE THIS PROBLEM SOLVER
POSSIBLE CAUSE
• A fuse in your home may be blown or the circuit breaker tripped.
Replace fuse or reset circuit breaker.
• Unplug your microwave oven, then plug it back in.
• Make sure 3-prong plug on oven is fully inserted into wall receptacle.
• Door not securely closed.
• START pad must be touched after entering cooking selection.
• Another selection entered already in oven and CLEAR/OFF pad not touched
to cancel it.
• Make sure you have entered cooking time after touching MICRO COOK pad.
• CLEAR/OFF pad was touched accidentally. Reset cooking program and
touch START pad.
• Make sure you entered a code number after touching REHEAT or the weight
after touching AUTO DEFROST.
All these things are normal with your microwave oven:
• Dull thumping sound while oven is operating.
• Some TV-radio interference might be noticed while
using your microwave oven. It's similar to the
interference caused by other small appliances and
does not indicate a problem with your oven.
®
/ 800.626.2000 / consumer information service