Table of Contents
Advertisement
Available languages
Available languages
REVERSE DOOR STRIKE
1. Using a T20
screwdriver, remove the two screws
® †
securing the door strike and move the door strike from the
left side of the dryer cabinet to the right side, securing it
with the removed screws.
2. Hang the door on the unit by placing set pin in dryer cabinet
hole and sliding door down. Using a Phillips screwdriver, install
screws 1 and 3 and then screws 2 and 4. Tighten all hinge
screws.
1
2
3
4
24
3. Install 2 plastic covers from the accessory kit into the spaces
where the hinges were removed. Place the plastic hinge
covers over the exposed hinges.
Set Pin
Advertisement
Table of Contents
