Certifications - Shure GLXD14 User Manual

Audio Output
Configuration
XLR Output
6.35 mm (1/4") output
Impedance
XLR Output
6.35 mm (1/4") output
Maximum Audio Output Level
XLR connector (into 600 Ω load)
6.35 mm (1/4") connector (into 3 kΩ load)
Pin Assignments
XLR Output
6.35 mm (1/4") connector
Receiver Antenna Input
Impedance
50 Ω
Antenna Type
½ Wave Sleeve Dipole, non-removable
Maximum Input Level
−20 dBm

Certifications

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This wireless system operates in the globally available ISM band 2400 MHz to 2483.5 MHz. The operation does not require a
user license.
Certified by ISED in Canada under RSS-210 and RSS-GEN.
IC: 616A-GLXD1, 616A-GLXD2, 616A-GLXD4
Certified under FCC Part 15.
FCC ID: DD4GLXD1, DD4GLXD2, DD4GLXD4
Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)
Impedance balanced
Impedance balanced
100 Ω
100 Ω(50 Ω, Unbalanced)
+1 dBV
+8.5 dBV
1=ground, 2=hot, 3=cold
Tip=audio, Ring=no audio, Sleeve=ground
Shure Incorporated
30/32