Mounting On A Table - LG 42LA6150 Owner's Manual

Mounting on a table

1
Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources of heat, as
y y
this may result in fire or other damage.
Adjusting the angle of the TV to suit view
Swivel 15 degrees to the left or right and adjust the
angle of the TV to suit your view.
15˚
CAUTION
When adjusting the angle of the TV, watch out for
y y
your fingers.
- Personal injury may occur if hands or fingers are
pinched. If the product is tilted too much, it may
fall, causing damage or injury.
Front
Securing the TV to a table
Attach the TV to a table to prevent from tilting forward,
damage, and potential injury.
1
Connect the Desk-mount Cables to the Stand Base
using the Bracket Screws.
2
Fix the Desk-mount Cables to a table using the Desk-
Mount Screws.
3
Once the TV is fixed, move the table close to the
wall. Children may go in, causing injuries.
m
1 0 c
10 cm
To prevent TV from falling over, the TV should be
y y
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV
may cause injury.
15˚
Rear
ASSEMBLING AND PREPARING
M4 x 8
2 EA
WARNING
15
2 EA