Maintenance; Specifications; Warranty; Limited 1-Year Warranty - Cobra ESR 700 Operating Instructions Manual

9 band radar/laser detector with extra sensory detection
Hide thumbs Also See for ESR 700:
Table of Contents

Advertisement

Maintenance And Specifications
Your Detector

Maintenance

Maintenance Of Your Radar Detector
Your detector is designed and built to give you years of trouble-free
performance without the need for service. No routine Maintenance is required.
If your unit does not appear to be operating properly, please follow these
troubleshooting steps:
Make sure the power cord is properly connected.
Make sure the socket of your vehicle's cigarette lighter is clean
and free of corrosion.
Make sure the power cord's cigarette lighter adapter is firmly
seated in your cigarette lighter.
Check the power cord fuse. (Unscrew the ribbed end cap
of the cigarette lighter adapter and examine the fuse. If required,
replace it with a 2-amp fuse only.)

Specifications

Band And Frequencies
Band
Frequencies
X Band
10.525
K Band
24.125
Safety Alert
24.070
Traffic Warning
24.110
System
24.190
24.230
Ka Band
34.700
Laser
910
Unit Dimensions And Weight
Dimensions*
1
1
" x 2
3
" x 3
7
"
4
4
8
(33 mm x 70 mm x 98 mm)
* Dimensions and weight measurements are approximate.
This radar detector is covered by one or more of the following U.S. patents: 5,497,148; 5,594,432;
5,612,685; 6,078,279; 6,094,148. Additional patents may be listed inside the product or pending.
14 English

Warranty

Limited 1-Year Warranty

For Products Purchased In The U.S.A.
Cobra Electronics Corporation warrants that its Cobra 9 Band Radar/Laser Detectors, and the
component parts thereof, will be free of defects in workmanship and materials for period of one (1)
year from the date of first consumer purchase. This warranty may be enforced by the first consumer
purchaser, provided that the product is utilized within the U.S.A.
Cobra will, without charge, repair or replace, at its option, defective 9 Band Radar/Laser Detectors,
products or component parts upon delivery to the Cobra Factory Service Department, accompanied
by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt.
You must pay any initial shipping charges required to ship the product for warranty service, but the
return charges will be at Cobra's expense, if the product is repaired or replaced under warranty.
This warranty gives you specific rights, and you may also have other rights which vary from state to state.
Exclusions: This limited warranty does not apply: 1) To any product damaged by accident.
2) In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs.
3) If the serial number has been altered, defaced or removed. 4) If the owner of the product resides
outside the U.S.A.
All implied warranties, including warranties of merchantability and fitness for a particular purpose
are limited in duration to the length of this warranty.
Cobra shall not be liable for any incidental, consequential or other damages; including,
without limitation, damages resulting from loss of use or cost of installation.
Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitations may not apply to you.
± 0.050
GHz

Customer Assistance

± 0.125
GHz

Product Service

± 0.010
GHz
For any questions about operating or installing this new Cobra product, or if parts are
± 0.010
GHz
missing...PLeASe CALL CoBRA FIRST...do not return this product to the store.
± 0.010
GHz
See customer assistance on page A1.
± 0.010
GHz
If this product should require factory service, please call Cobra before sending the product. This will
ensure the fastest turn-around time on any repair. If Cobra asks that the product be sent to its
± 1.300
GHz
factory, the following must be furnished to have the product serviced and returned:
± 50
nm
1. For Warranty Repair include some form of proof-of-purchase, such as a mechanical reproduction
or carbon of a sales receipt. Make sure the date of purchase and product model number are clearly
readable. If the originals are sent, they cannot be returned; 2. Send the entire product; 3. Enclose a
Weight*
description of what is happening with the product. Include a typed or clearly printed name and
address of where the product is to be returned, with phone number (required for shipment).
4.26 oz.
4. Pack product securely to prevent damage in transit. If possible, use the original packing material;
5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or
(121 g)
Priority Mail to avoid loss in transit to: Cobra Factory Service, Cobra Electronics Corporation, 6500
West Cortland Street, Chicago, Illinois 60707 U.S.A.; 6. If the product is in warranty, upon receipt
of the product it will either be repaired or exchanged depending on the model. Please allow
approximately 3 – 4 weeks before contacting Cobra for status. If the product is out of warranty, a letter
will automatically be sent with information as to the repair charge or replacement charge.
Warranty And Product Service
Nothing Comes Close to a Cobra
®
15

Advertisement

Table of Contents
loading

Table of Contents