Preparations; Installing A Battery - Nikon Lite Touch Zoom 100ED Instruction Manual

Installing a battery

Battery type
Use one CR123A or DL123A 3V lithium battery in this camera.
1.
Open the battery chamber lid.
While releasing the lock as indicated by the arrow in the illustration
above, open the battery chamber lid.
2.
Install a new battery.
Observe the correct polarities and insert the battery in the direction
shown in the illustration above.
3.
Close the battery chamber lid.
Firmly press the battery chamber lid until it clicks shut.
The built-in clock is reset when the battery is removed. Remember to
set the time and date. (
12

Preparations

p. 41)