Operating The Projector - ViewSonic Projector PJ250 User Manual

Operating the Projector

Set up the screen and the projector
1
See the affixed "Projection Distance Table" for the desired distance between the screen and the
projector.
Connect the personal computer or video equipment to the projector.
2
Connect the AC IN connector of the projector and the power outlet using the supplied power
3
cable.
The POWER indicator will light amber, the cooling fan will rotate at low speed, and the unit will
enter the standby mode.
To wall outlet
Switch the projector power on.
4
Main unit operation: Press and hold the POWER button for several seconds.
Remote control operation: Press the POWER ON button.
The POWER indicator changes to a flashing green and lights steadily after about 60 seconds. The
projection screen brightens after about 40 seconds.
The projector is now capable of regular projection.
Switch the power of the connected equipment on.
5
Select the input
6
Main unit operation: Press the SOURCE button.
Remote control operation: Press the desired button from among the input selection buttons.
7 ViewSonic PJ250
Firmly plug in all the way
Flashes green Lit green
Power is on
(Approximately
60 seconds)