Table of Contents
Advertisement
OPTION Menu (continued)
Item
SERVICE
RESET
Pres sing the
(or the ENTER) button calls the
SERVICE menu.
SERVICE Menu
Select an item using the
(or the ENTER) button to perform each function.:
FANSPEED
AUTO ADJUST
FANSPEED Select the fan speed level using the
HIGH
The HIGH ups rotation speeds of fans, though. Please
use this function in using a projector at highlands etc.
Note that the projector is noisier when the HIGH is
memo
selected.
AUTO
Select the ENABLE or the DISABLE using the
buttons.:
ADJUST
ENABLE
When you want to keep the current adjustment state,
select signal change to a RGB signal performs the
automatic adjustment of the vertical position (V
POSITION), the horizontal position (H POSITION), the
clock phase (H PHASE) and the horizontal size (H SIZE).
LENS TYPE Select the lens type currently used using the
buttons.:
AUTO
Please select depending on the following.
AUTO: automatically selects optimum mode.
1: for a standard lens (Type NL-500 etc.)
2: for a fixed short throw lens (Type FL-501 etc.)
3: for a short throw lens (Type SL-502 etc.)
4: for a long throw lens (Type LL-503 etc.)
5: for a super long throw lens (Type LL-504 etc.)
This setting has an influence on the keystone
memo
distortion etc.
About the optional lens ask your dealer.
memo
LENS
Select the ENABLE or the DISABLE using the
buttons.:
LOCK
ENABLE
Selecting the ENABLE locks the adjustment of the lens
shift, the zoom and the focus.
Select the EXECUTE using the
items.:
EXECUTE
CANCEL
The items of the OPTION menu are collectively returned to the initial
setting. Note that the items "VOLUME", "LAMP TIME" and "FILTER TI
ME" are not reset.
Description
/
buttons, and press the
LENS TYPE
NORMAL
DISABLE
1
2
3
4
DISABLE
button to reset the OPTION menu
LENS LOCK
/
buttons.:
/
/
5
/
ViewSonic PJ1165
34
Advertisement
Table of Contents
