Philips sonicare HX91 Manual page 17

Sanitizing
Activating or deactivating the Easy-start
feature
1 Attach the brush head to the handle.
2 Place the handle in the plugged-in charger or
sanitizer.
- To activate Easy-start:
Press and hold the power on/off and mode
button for 2 seconds. You hear 2 beeps to
indicate that the Easy-start feature has been
activated.
- To deactivate Easy-start:
Press and hold the power on/off and mode
button for 2 seconds. You hear 1 beep to
indicate that the Easy-start feature has been
deactivated.
Note: Using the Easy-start feature beyond the
initial ramp-up period is not recommended and
reduces Philips Sonicare effectiveness in removing
plaque.
Note: Each of the first 14 brushings must be at least
1 minute in length to properly move through the
Easy-start ramp-up cycle.
- With the UV sanitizer you can clean your brush
head for optimal cleanliness.
Note: The UV sanitizer is not a replacement for
rinsing your brush head with water, but is
additive to rinsing with water.
Unplug the sanitizer, discontinue use and call
Consumer Care if:
- The UV light bulb remains on when the door is
open.
- The window is broken or missing from the
sanitizer.
17
English