Changing Basic Settings; Cleaning And Servicing; Cleaning The Tub - Siemens SE73HX60CE User Manual

en Cleaning and servicing
Basic setting
SideLight
Tone volume
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Open the appliance door.
1.
Press ⁠ .
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows Hxx.
a The display shows
Press
4.
the display shows the required set-
ting.
Press repeatedly until the dis-
5.
play shows the right value.
You can change several settings.
To save the settings, press
6.
for 3 seconds.
Close the appliance door.
7.
34
Display text Selection
1
I01 I00 - I01
1
b02 b00 - b03
rE YES
⁠ .
repeatedly until
Description
While the programme is running, a
strip of light appears on the left-hand
side of the appliance. If the appli-
ance door is not completely closed,
the strip of light will flash. The pro-
gramme has ended when the strip of
light is no longer visible on the left-
hand side.
Switch SideLight on "I01" or off
"I00".
Adjustment of tone volume.
Level "b00" switches the signal tone
off.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.

Cleaning and servicing

Cleaning and servicing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.

Cleaning the tub

WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
Never use detergents containing
▶
chlorine.
Remove any coarse soiling in the
1.
interior with a damp cloth.
Add detergent to the detergent dis-
2.
penser.
Select the programme with the
3.
highest temperature.
→ "Programmes", Page 17
"Start the programme without
4.
tableware." → Page 31