Picture; Color Temp; Temp Adjust - ViewSonic CD4225 User Manual

Picture

Picture Mode
Contrast
Brightness

Color Temp

Temp Adjust

Sharpness
Standard
1360 x 768 60Hz
Picture Mode
• Allows you to choose from the following preset picture modes: Standard, Vivid, Cinema and User.
• Press the ENTER button on the remote control, or the Menu/Enter button on the control panel to
change selection.
Contrast
• Adjusts the image brightness in relation to the input signal.
• Press the or PLUS (+) button to increase contrast.
• Press the or MINUS (-)/Auto button to decrease contrast.
Brightness
• Adjusts the image brightness in relation to the background.
• Press the or PLUS (+) button to increase black level.
• Press the or MINUS (-)/Auto button to decrease black level.
Color Temp
• Use to choose a color temperature.
• The following options are available: 9300, 6500, 5800, sRGB and USER.
• Press the / or PLUS (+)/MINUS (-)/Auto button to change setting.
Temp Adjust
• You can use this function to set up the USER mode of Color Temp.
• The color levels of red, green, and blue are adjusted by the color bars.
• Press the /PLUS (+) or
ENTER button on the remote control, or the Menu/Enter button on the control panel.
• Press the or PLUS (+) button to increase color level.
• Press the or MINUS (-)/Auto button to decrease color level.
Sharpness
• This function is digitally capable to keep crisp image at any timings.
• It is adjustable to get a distinct image or a soft one as you prefer and set independently for each
picture mode.
• Press the or PLUS (+) button to increase sharpness.
• Press the or MINUS (-)/Auto button to decrease sharpness.
ViewSonic CD4225
/MINUS (-)/Auto button to select Red, Green or Blue, and then press the
25