ENGINE REASSEMBLY
9. Install:
•
Carburetor
Screw (clamp):
2 Nm (0.2 mkg)
See section "CARBURETOR-INSTALLA-
TION" in CHAPTER 6.
10. Adjust:
•
Throttle cable free play
Free play:
3 ~ 5 mm
See section "THROTTLE CABLE FREE
PLAY ADJUSTMENT" in CHAPTER 3.
11. Install:
•
Fuel tank
CAUTION:
Do not start the engine until it is filled with oil.
12. Fill with:
•
Engine oil
Amount of oil (total):
3.0 litres
See section "ENGINE OIL REPLACE-
MENT" in CHAPTER 3.
13. Check:
•
Engine idle speed
Engine idle speed:
1.150 ~ 1.450 rpm
See section "IDLE SPEED ADJUST-
MENT" in CHAPTER 3.
14. Install:
•
Seat
Screw (seat):
10 Nm (1.0 mkg)
5-78
ENG