Installation-Wall Mount (Optional) - ViewSonic ViewPanel VG181 VLCDS21594-1 User Manual

Installation-Wall Mount (optional)

To get a wall mounting kit, contact ViewSonic
compatible with the VESA wall mounting standards. To convert the desk-mounted
VG181 to a wall-mount installation, do the following:
1 Disconnect DC power.
Make sure the power is turned off
and then disconnect the DC power
cord from the back of the
ViewPanel.
2 Lie the ViewPanel face
down on a flat surface.
Be sure nothing sharp can scratch
or puncture the LCD surface (the
face of the ViewPanel).
3 Pull the square-like cover
from the back of the
ViewPanel.
The plastic cover should hang
over the back of the neck of the
ViewPanel to expose the four
screws to the wall mount.
ViewSonic VG181
Remove the plate on the
®
or your local dealer. The VG181 is
4 Remove the four screws to
disconnect the base from
the back of the ViewPanel.
Store the base in a safe place.
5 Attach the ViewPanel to the
wall mounting kit.
Follow the instructions that come
with the wall mounting kit.
Remove four
screws (step
4).
Threaded
holes for
VESA
compatible
wall mounts
®
E
N
G
L
I
S
H
7