Installation Of Wall Mount (Optional) - ViewSonic VG710b User Manual

Installation of Wall Mount (Optional)

To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions
that come with the base mounting kit. To convert your LCD display from a desk-mounted to a
wall-mounted display, do the following:
Four vesa screw holes
ViewSonic VG710b/VG710s
1. Disconnect Power.
2. Lay the LCD display face down on a towel or
blanket. If you remove the base for a wall mount,
the microphone in the base is disconnected. But,
you can leave the base attached to the LCD dis-
play with the wall mount. Notice the four screw
holes for the wall mount on the back as shown on
the left.
3. Attach the mounting bracket from the VESA com-
patible wall mounting kit (100 mm x 100 mm dis-
tance).
4. Attach the LCD display to the wall, following the
instructions in the wall-mounting kit.
6