Quick Installation - ViewSonic VE170M User Manual

Quick Installation

1 Connect video cable
Make sure both the LCD display and
computer are powered OFF.
• Remove the middle and lower rear panels
• Connect the video cable from the
LCD display to the computer.
Macintosh users: Models older than G3
require a Macintosh adapter. Attach the
adapter to the computer and plug the video
cable into the adapter.
To order a ViewSonic
contact ViewSonic Customer Support.
2 Connect power cord and AC/DC
adapter
Connect the power cord and AC/DC adapter
from the LCD display to a properly grounded
AC outlet.
3 Power-ON LCD display and computer
Power-ON the LCD display, then power-ON
the computer. This sequence (LCD display
before computer) is very important.
NOTE: Windows 95, 98 or 2000 users may
receive a message asking them to install the
VE170m/VE170mb INF file.
3rd
Serial Number is
underneath upper
panel. Remove
the middle and
lower rear panels
before removing
the upper panel.
1st
Pull this middle
panel off first
before connecting
cables
2nd
Pull this lower
panel off second
before connecting
cables
4 ViewSonic
®
Macintosh adapter,
AC IN (power)
AC/DC adapter for LCD display power cord
VE170m/VE170mb
4 Install display optimization files
(INF and ICM files)
(1) Insert the ViewSonic Wizard CD-ROM
into your computer's CD-ROM drive.
NOTE: If your computer does not have a
CD-ROM drive, see "Customer Support" on
page 13.
(2) Wait for the CD-ROM to auto-start.
NOTE: If the CD-ROM does not auto-start:
double-click on the CD-ROM icon in the
Windows Explorer, then double-click on
viewsonic.exe
(3) Follow the on-screen instructions.
5 Windows users: Set the timing
mode (resolution and refresh rate)
Example: 1280 X 1024 @ 60 Hz.
For instructions on changing the resolution
and refresh rate, see the graphic card's user
guide that came with your computer.
Installation is complete. Enjoy your new
VE170m/VE170mb LCD display.
To register your product go online to
www.viewsonic.com.
The ViewSonic Wizard CD-ROM also
provides an opportunity for you to print the
registration form which you may mail or fax
to ViewSonic.
Analog video OUT
Audio IN
Audio cable
Video cable
Computer
power cord