Wall Mounting (Optional) - ViewSonic VA2261-6 User Manual

Wall Mounting (Optional)

NOTE: For use only with UL Listed Wall Mount Bracket.
To obtain a wall-mounting kit or height adjustment base, contact ViewSonic
your local dealer. Refer to the instructions that come with the base mounting kit.
To convert your display from a desk-mounted to a wall-mounted display, do the
following:
1. Find VESA compatible wall-mounting kit which meets the quaternions below,
Max Hole pattern
Loading (W x H; mm)
14kg 75mm x 75mm
2. Verify that the power button is turned Off, then disconnect the power cord.
3. Lay the display face down on a towel or blanket.
4. Remove the base. (Screws removal might be required.)
5. Attach the mounting bracket from the wall mounting kit using screws of the
appropriate length.
6. Attach the display to the wall, following the instructions in the wall-mounting kit.
Interface Pad
Pad Hole
(W x H x D)
90 mm x
90 mm x Ø 5mm
2.6 mm
5
or
®
Screw Q'ty &
Specification
4 piece
M4 x 10mm