Adjusting The Screen Image - ViewSonic G70m/G70mb User Manual

Adjusting the Screen Image

To adjust the screen image, follow the instructions in steps
below. You will use the buttons of the Front Control Panel to adjust the
®
OnView controls, which are displayed on the Main Menu (shown below). The
OnView controls are explained on pages 7-9.
E
N
G
L
I
S
H
Increases
Audio
Volume
Decreases
Audio
Volume
Muted- Mutes
Audio Audio
Light
* The monitor automatically degausses each time you turn it on, removing the buildup of magnetic
fields that can affect color purity and convergence. To prevent possible damage, if you turn the
monitor off, then immediately on again, wait 20 minutes before doing this again. Do not turn the
monitor on and off repeatedly. To manually degauss the monitor, see the instructions on page 8.
6 Using the Monitor
—
[M] and [L] scrolls
Button [ ]
1
up and down Main
displays
Menu to highlight
Main Menu
control (or control
pair)
›
[M] and [L]
Button ] exits
[1
decreases or
control screen or
increases value
Main Menu and
of the selected
saves adjustments
control
–
through
Internal Microphone
Main Menu
Front Control Panel
˜ ™
Button
displays
control screen
for highlighted
control
š
Power light:
Green = On
Orange = Power
ViewSonic G70m/G70mb
›
[2]
–
Power
On/Off
Saving
Mode