Selecting A Video Source; Picture Mode - ViewSonic CD4230 VS12541 User Manual

Selecting a video source

Normally the CD4230 LCD monitor automatically searches for available video sources after it is turned
on. You can also manually select one if multiple video sources are connected to the LCD monitor.
To select a video source using the control panel:
1. Press the INPUT button on the control panel to display the Input Source menu.
2. Press the INPUT button several times, or press the
or button to select an input source.
To select a video source using the wireless remote control:
1. Press the INPUT button on the remote control to display the Input Source menu.
2. Press the INPUT button several times, or press the
or button on the remote control to select an
input source.
You can also press the AV, VGA, DVI, HDMI or YPbPr button according to the video source you wish to
view.

Picture Mode

Cinema User
Standard Vivid
ViewSonic CD4230
22