Table of Contents
Advertisement
Safety Precautions
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN
SETTING UP AND USING THE LCD COLOR MONITOR:
•
DO NOT REMOVE MONITOR BACK COVER. There are no user serviceable
parts inside and opening or removing covers may expose you to dangerous
shock hazards or other risks. Refer all servicing to qualified service personnel.
•
Do not spill any liquids into the cabinet or use your monitor near water.
•
Do not insert objects of any kind into the cabinet slots, as they may touch
dangerous voltage points, which can be harmful or fatal or may cause electric
shock, fire or equipment failure.
•
Do not place any heavy objects on the power cord. Damage to the cord may
cause shock or fire.
•
Do not place this product on a sloping or unstable cart, stand or table, as the
monitor may fall, causing serious damage to the monitor.
•
Do not place any objects onto the monitor and do not use the monitor outdoors.
•
The inside of the fluorescent tube located within the LCD monitor contains
mercury. Please follow the laws or rules of your municipality to dispose of the
tube properly.
•
Do not bend power cord.
•
Do not use monitor in high temperature, humid, dusty, or oily areas.
•
If monitor or glass is broken, do not come in contact with the liquid crystal and
handle with care.
•
Allow adequate ventilation around the monitor, so that heat can properly
dissipate. Do not block ventilated openings or place the monitor near a radiator
or other heat sources. Do not put anything on top of the monitor.
•
The power cable connector is the primary means of detaching the system from
the power supply. The monitor should be installed close to a power outlet, which
is easily accessible.
•
Handle with care when transporting. Save packaging for transporting.
•
Please clean the holes of back cabinet to reject dirt and dust at least once a year
because of set reliability.
•
If using the cooling fan continuously, it's recommended to wipe holes a minimum
of once a month.
•
When installing the remote control batteries;
- Align the batteries according to the (+) and (-) indications inside the case.
- Align the (-) indication of the battery first inside the case.
iv
Advertisement
Table of Contents
