Listening To The Radio - JVC KD-SV3704 Instructions Manual

Vcd/cd receiver
Hide thumbs Also See for KD-SV3704:
Table of Contents

Advertisement

Listening to the radio

1
2
3
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
On the Unit ONLY:
Reception improves, but stereo effect will be lost.
• The MONO indicator lights up on the display.
To restore the stereo effect, repeat the same
procedure to select "MONO OFF." The MONO
indicator goes off.
8
Change the source to tuner.
Press the button repeatedly until the tuner frequency is displayed.
Select the band.
F(FM) 1
F2
A2
A(AM) 1
Search for a station to listen—Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same
button again.
• You can also search a station manually—Manual Search. Hold either one of
the buttons until "M" appears on the display, then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, the ST
indicator lights up on the display.
MONO ON
F3
To tune in FM stations only with
strong signals—LO/DX (Local/
Distance-extreme)
If received signals are weak, you may only hear
noises. You can make this unit detect only stations
with sufficient signal strength while searching for FM
stations.
On the Unit ONLY:
[Hold]
Only stations with sufficient signal strength will be
detected.
• The LO indicator lights up on the display.
To tune in to all receivable stations, repeat the
same procedure to select "DX."
• The LO indicator goes off.
LOCAL

Advertisement

Table of Contents
loading

Table of Contents