Connecting The Charging Station; Before Using The Appliance For The First Time - Bosch BSR1 Series Instruction Manual

Before starting
4 a
b
c
5
74

Connecting the charging station

Do not lay any cables in front of the charging station as
they could prevent the robot vacuum from docking.
4
Fig.
a) Plug the charging cable into the charging station.
b) Wind the rest of the power cable around the cable
tidy.
Do not wind the power cable more than necessary.
c) Plug the mains plug into a power socket.
Before using the appliance for the first time
The fragile surfaces of your robot vacuum are covered
with protective film during transit to prevent the appli-
ance being damaged or scratched.
5
Fig.
Remove the protective film from the top of your robot
vacuum and the charging station before using them
for the first time.
en