Installation Procedure - Edimax EW-7128g User Manual

2 Installation Procedure

Before you proceed with the installation, please notice following descriptions.
Note1: The following installation was operated under Windows XP. (Procedures are similar for
Windows 98SE/Me/2000.)
Note2: If you have installed the Wireless PCI Card driver & utility before, please uninstall the old
version first.
Hardware Installation
A. Turn off your computer and remove its cover.
B. Insert the PCI card to an available PCI slot firmly.
C. Secure this card to the rear of the computer chassis and put back the cover.
D. Secure the antenna to the antenna connector of the card.
E. Turn on the computer.
Software Installation
A. A "Found New Hardware Wizard" is displayed after the PCI card is installed and the computer is
restarted. Click "Cancel".
B. Insert the Installation CD to your CD-ROM Drive. Execute the "setup" program.
3