Cisco Linksys WRT600N User Manual page 17

Dual-Band Wireless-N Gigabit Router with Storage Link
Wireless
• Basic Wireless Settings. Enter the basic settings for your wireless network on this screen.
• Wireless Security. Enable and configure the security settings for your wireless network.
• Wireless MAC Filter. Wireless access can be filtered by using the MAC addresses of the wireless devices
transmitting within your network's radius.
• Advanced Wireless Settings. For advanced users, you can alter data transmission settings on this screen.
Security
• Firewall. You can enable or disable the Router's firewall, as well as various filters.
• VPN Passthrough. To enable or disable IPSec, L2TP, and/or PPTP Passthrough, use this screen.
Storage
• Disk. Describes the disk currently attached to the Router.
• Media Server. Scans for contents using a built-in media server.
• FTP Server. Creates an FTP server that can be accessed through the Internet.
• Administration. Manages the user and groups of users that can access the shares.
Access Restrictions
Internet Access Policy. Create policies to control Internet access for your local network users.
Applications & Gaming
• Single Port Forwarding. This allows you to do port mapping and forwarding for a single service port.
• Port Range Forwarding. Set up public services or other specialized Internet applications on your network.
• Port Range Triggering. Configure the Router to watch outgoing data for specific port numbers.
Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link 10
Overview