LG MC-924JRZ Owner's Manual page 27

Insert the shaft of left plate
into the shaft of motor.
To Clean ROTISSERIE &
METAL TRAY
When cooking is completed,
Press START.
separate the ROTISSERIE from
the food. Take care when
After cooking hold the rotisserie bar of both side with the handle and lift up
handling both ROTISSERIE &
the right end slightly and pull out from the left end.
metal tray and food stuff as it is
very hot. During cooking it is
NOTE:
normal for the ROTISSERIE &
1. The rotisserie cooking is convenient for grilling of meat and poultry.
metal tray to be stained from the
All the surface of the food will become even brown without overturning.
food. Simply clean the
2. The rotisserie cooking can be used in grill mode, convection mode and
ROTISSERIE & metal tray with a
African Cook.
warm soapy water and a soft
3. The rotisserie bar is used for rotisserie cooking only. After rotisserie cooking
cloth. If the ROTISSERIE & metal
is finished remove the rotisserie bar and store with other accessories.
tray remain stained after
washing, Utensils in hot soapy
CAUTION
water for a few minutes.
1. DO NOT USE THE METAL TRAY AND ROTISSERIE WITH NO LOAD, IT WILL BE
Do not use metal scouring pads.
DAMAGED THE OVEN.
They will scratch the surface .
2. AFTER COOKING, THE METAL TRAY WILL BECOME EXTREMELY HOT.
3. It is recommended to remove the grease from the turntable every time before
cooking. Hot grease on the turntable may cause smoke.
The shaft of motor
Installation & Cooking
Put the shaft of right plate on
the holder of rotisserie.
Glass Tray
Rotisserie
The holder of rotisserie
Metal Tray
27