Table of Contents
Advertisement
TIMER RECORDING
There are two kinds of timer recording. One is daily timer recording, and the other is weekly timer recording.
Once the timer programs are set, the VCR can retain all programmed information in the event of a power failure (10 day maximum
memory storage). Before setting timer programs, make sure that the present time is correct. (See page 15 ~ 16.)
Setting the Timer Program
The timer programs are set on the two pages of PROGRAM screen which provides "on/skip", start time, end time and recording
8:30.
time mode for setting.
The blinking position moves to right direction or downward with the
button. When the program event is set to SKIP, timer recording will not be carried out even if the start or end time is set.
Monday 1
2
Tuesday 1
2
Wednesday 1
2
Thursday 1
2
ON, SKIP displays
Starting hour display
Daily Timer Recording
To record every day for certain period starting at certain time, set daily timer recording.
In case of recording every day from 8:30 to 17:00 in A24 mode;
Press the DISPLAY
1
button. The MENU
screen appears on the
monitor screen.
TIME MODE
DISPLAY
–
SET
SHIFT
Press the
2
SHIFT button to blink
PROGRAM.
TIME MODE
DISPLAY
–
SET
SHIFT
Press the + or – SET
3
button.
TIME MODE
DISPLAY
–
SET
TRACKING
SHIFT
SHIFT
i
Then ON of MO1 line blinks
on Program Screen (1).
H
0
2
1
25
-
-
:
-
-
-
-
:
-
-
N
O
DISPLAYTIME MODESET
2
H
T
WE2 ON --:-- --:-- 120H
SHIFTbutton to set start time to
PROGRAM
PROGRAM
M E N U
DISPLAYTIME MODESET
ALARM RECALL
TH2 ON --:-- --:-- 120H
PROGRAM
PROGRAM
M E N U
+–6Press the + or – SETbutton and the
PROGRAM
PROGRAM
SU2 ON --:--
--:-- 120H
PROGRAM Screen (1)
Recording time display
Ending minute display
Ending hour display
Starting minute display
+
TRACKING
LOCATION SELECT
or
+
TRACKING
LOCATION SELECT
+
TRACKING
LOCATION SELECT
SHIFT button, and to opposite direction with
PROGRAM Screen (2)
Friday 1
2
Saturday 1
2
Sunday 1
2
Daily
Press the
SHIFT
4
button to proceed to
PROGRAM screen (2).
120H of DLY line blinks.
Press the
SHIFT
5
button to blink start time
of DLY line, and press
once the + or – SET
button to display the
present time.
LOCATION SELECT+
SHIFT
Advertisement
Table of Contents
