Advertisement
•
When the scanner cannot read a barcode...
• The top window of the scanner is dirty or dewed.
• Barcode system does not correspond to scanner
specification.
• Barcode has a defect. (Print of a barcode is too
light, dirty, blurred, or defaced.)
• Angle to read a barcode is not appropriate.
• Barcode to be read is too near to the top window
or too far from the top window.
When a trouble still exists after taking the actions described above, ask your TOSHIBA TEC representative.
•
When the scanned data is not transferred to the host terminal...
• The connector of the interface cable has been de-
tached.
When a trouble still exists after taking the action described above, ask your TOSHIBA TEC representative.
8. SPECIFICATIONS
8.1
Scanner Main Body
Dimensions:
Weight:
Readable code:
Interface:
Reading Height:
Input Power:
8.2
Interface Cable (Option)
Cable Length:
Cause
Cause
200 (W) x 90 (D) x 220 (H) mm (Vertical standing dimensions)
1.5 kg
EAN/JAN-13, EAN/JAN-8, UPC-A, UPC-E, EAN128,
EAN-13/8 and UPC-A/E with Supplemental 2 or 5 digits,
ITF (Interleaved 2 of 5), NW7 (CODABAR),
CODE39, CODE93, CODE128
OCIA
RS-232C
USB
Up to 200 mm above from the Scanner Window surface
12 VDC – 10%
5.0 m
• Clean the top window.
• Reading a barcode is unavailable. Use the barcode
system corresponding to the scanner specification.
• Reading a barcode is unavailable.
Read a perfect barcode attached to the same article.
Enter the barcode of the article manually by the
keyboard.
(However, depending on the function of the host
terminal.)
• Read the barcode at the appropriate angle. (Refer to
page 5 in details.)
• Read the barcode in the effective scanning zone.
(Refer to pages 4 and 5.)
• Attach the connector securely.
- 8 -
LS-780 SERIES
Action
Action
EO1-19036
Advertisement
