Table of Contents
Advertisement
HOW TO REPLACE DOOR HANDLES
NOTE:
Handle appearance may vary from
illustrations on this page.
1. Replacing Refrigerator Door Handle
• Place the handle on the door by
adjusting handle footprints to fit mounting
fastners and tighten the set screws with
the 3/32" Allen wrench.
NOTE: If the handle mounting fasteners
need to be tightened or removed use a
1/4" Allen wrench.
2. Replacing Freezer Drawer Handle
• Place the handle on the door by
adjusting handle footprints to fit mounting
fastners and tighten the set screws on
the bottom of the handle with a 1/8" Allen
wrench.
NOTE: If the handle mounting fasteners
need to be tightened or removed use a
1/4" Allen wrench.
w w WARNING
When the customer takes apart the handle or
assemble it from a refrigerator, please be
cautious of following things.
• Hold the handle with your own hand to make
sure not to drop the handle to the floor or instep
while taking apart the handle from a refrigerator.
• Do not swing the handle towards people or
animals after taking apart the handle.
• Insert the bracket hole of the handle into the
stopper bolt of the door exactly, and then
assemble the set screws to fix the handle.
• Check if there's any gap between the door and
handle after fixing the handle.
REFRIGERATOR INSTALLATION
Mounting
Fasteners
14
Advertisement
Table of Contents
