LENCO SCD-24PK Instruction Manual page 5

FOR FM RECEPTION PULL OUT ROD ANTENNA
FM
COMPACT DISC PLAYBACK
1 . Set to CD
FUNCTION
2 . Open the CD door by pushing
CD Door Open / Close button.
3. Insert a disc with the label side facing up.
4 . Close the CD door.
The disc will rotate and the total
tracks of the disc will show on
the display.
TO INTERRUPT PLAYBACK
Press the Play/Pause button and the symbol " " will
be flashing. Press the button again to resume playback.
DISC
WMA display
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the skip buttons according to the desired skip direction.
• Play/back resumes from the selected track.
• When the button is pressed once during play, the previous track starts again.
• When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
• Keep the or button pressed during playback,
and release the button as soon as you recognise the desired
passage. Then normal CD playback will resume from this point.
Unit will be automatically off within 15 mins without any operation (in stop mode / CD door open).
After auto off, slide the FUNCTION selector to OFF position and then slide to RADIO / CD position for listening.
NOTE : 1. FM stereo LED indicator lights if receive FM stereo broardcast and the MODE
switch set on "FM STEREO".
2. When too much noise is heard during FM STEREO reception, set MODE
switch to FM mono.
AFTER LISTENING
Set the FUNCTION selector to OFF.
CD/MP3
DISC
MP3 display CD display
5. Press the PLAY/PAUSE button.
Track number "01" & the symbol " " & "DISC"
will be shown during normal compact disc playback.
Track number "001", the symbol " " & "DISC &
MP3" will be shown during MP3 playback.
Track number "001", the symbol " " & "DISC &
WMA" will be shown during WMA playback.
WMA display
TO STOP PLAYBACK
Press the STOP button and the display shows the total
tracks of the disc.
DISC
GB 3
DISC DISC
MP3 display
DISC
CD display